Yhteystiedot

Ammattilehti.fi
Vironkatu 9, 00170 Helsinki
www.ammattilehti.fi

Janne Jokela
janne.jokela@ammattilehti.fi
050 412 9030

Taneli Jokela
taneli.jokela@ammattilehti.fi
050 320 8174

Tero Lahtinen
tero.lahtinen@ammattilehti.fi
050 464 7972

Satunnaiset kuvat

Smart throttle valve for higher pressure ranges

03.02.2017 9.10

valveeee.jpg

Machine manufacturers can now realize hydraulic systems with reduced dimensions and improved control behavior thanks to the new Rexroth 2-way proportional throttle valves. These cartridge valves are designed for a maximum operating pressure of 420 bar. The newly developed on-board electronics enable compensation of decentralized disturbances for improved control quality.

In hydraulics, the trend towards higher pressure ranges becomes more and more important. This enables machine and system manufacturers to use smaller system components to further support the traditional strengths of hydraulics, force density and low space requirements. These requirements were taken into account by Rexroth in the development of the new 2WFCE throttle valves with a maximum operating pressure increase from 315 to 420 bar. 

The new 2WFCE cartridge valves are used as throttle valves for increased flow rates or in combination with a pressure compensator for flow control. For example, they realize decompression of the system in press applications or control the rapid traverse velocity of pressing cylinders. In plastics processing machines, they are applied for pQ control in displacement pump systems or for discharge throttling at closing units for regenerative operation.

The newly developed digital electronics with microprocessor enable uncomplicated optimization of controller parameters at clearly increased dynamics. The units combine high response sensitivity and clearly improved frequency characteristics at reduced hysteresis. This enables improved control quality at shorter cycle times. During production, Rexroth applies automatic calibration of all valves and stores individual data in the electronics. This way, the time and effort of commissioning in series production of machinery is reduced. In case of power failure or cable break, the main stage is automatically switched to a fail safe position.

As no analog potentiometers are required, the valves are more resistant to vibrations. Additionally, the admissible ambient temperature is increased from 50 to 60°C which makes the valves suitable for direct installation at hydraulic pumps and use in enclosed spaces.

26.03.2024 9.00Kymmenen miljoonan tutkimushankkeessa kehitetään liikkuvien työkoneiden ja ihmisten yhteistoimintaa
25.03.2024 10.00NSK kehittää yhteistyössä pitkälti räätälöitävää robottikättä
22.03.2024 23.11KATSO 22.3. LÄHETYS VILLISTÄ LÄNNESTÄ TURUSTA! Ammattilehden Hyviä uutisia! tarjoaa kuljetus-, maarakennus- ja metsäalan tuoreet kuulumiset
20.03.2024 9.00Digikaksonen tuo selkeitä säästöjä myös teollisuusympäristössä
19.03.2024 11.00Parker Chomerics kasvattaa sähköä johtavien vaahtomaadoitusten ja EMI-suojaustiivisteiden valikoimaa
18.03.2024 11.11Suomeen Naton yrityskiihdyttämö ja kaksi testikeskusta
15.03.2024 20.00KATSO 15.3. LÄHETYS! Ammattilehden Hyviä uutisia! tarjoaa kuljetus-, maarakennus- ja metsäalan tuoreet kuulumiset
14.03.2024 11.00Valmet toimittaa uuden keittimen yläerottimen Södra Cellin Mönsteråsin tehtaalle Ruotsiin
12.03.2024 11.00Yksityisen sektorin tehdyn työtunnin kustannus nousi 4,3 % loka-joulukuussa 2023
10.03.2024 14.44Katso video kaivukoneiden lumenveiston SM-kisoista Juupajoelta - taidetta hydrauliikan voimalla

Siirry arkistoon »